HCIC HC-series power units: 12 V / 24 V DC and 110/220/380 V AC motor options, gear pumps from 0.18 to 8.0 cc/rev, system pressure up to 25 MPa. Every unit is pressure-tested at 3000 PSI before shipment — engineered for dump trailers, vehicle hoists, lift tables and industrial machinery.
Every configuration below is an individual model with its own specification page — no parameter ranges, one model per page.
Single-acting DC power units (power up / gravity down) built around 12 V and 24 V DC motors from 0.5 kW to 4.0 kW with gear pumps from 0.18 to 2.0 cc/…
Browse 128 models
Double-acting DC power units (power up / power down) for applications where the cylinder must be powered in both directions — tipper bodies, scissor l…
Browse 100 models
AC-powered hydraulic power units with 0.75–3.0 kW two-pole motors for fixed installations: tire changers, workshop lifts, lift tables and industrial e…
Browse 84 models
Larger HC30-series power stations with multi-solenoid manifolds for machines that operate several cylinders independently — options include backup han…
Browse 6 models
Telescopic and single-acting cylinders for dump bodies and tipping trailers.
DC power units for truck and van tailgates, DC12V/DC24V with wired or wireless control.
Two-post and scissor lift power packs with double-acting circuits.
Multi-circuit AC power units controlling three groups of double-acting cylinders.
Single- and double-acting units for scissor lift tables and loading dock levelers.
Compact DC power packs for battery-powered material handling equipment.
Low-noise mini power units for medical beds, chairs and care lifts.
Custom manifolds, tanks and circuit designs built to your drawings.
Send us your template or drawings and we quote by graph. Our standard process: template/drawings → quote → contract → deposit → scheduled production → machine testing → balance payment → shipment.
Custom options include manifold blocks, cartridge valve stacks, tank shape and capacity, motor voltage, gear pump displacement, wired or wireless remote controls and special pressure settings.
Send Your DrawingA hydraulic power unit (also called a power pack) is a self-contained assembly that supplies pressurised hydraulic oil to a cylinder or actuator. It combines a motor, gear pump, oil reservoir and a manifold of cartridge valves in one compact unit.
The HC series covers system working pressures from 0 to 25 MPa (0–250 bar / 0–3625 PSI). Each model lists its P1/P2/P3 pressure ratings.
Yes. The solenoid valve coil can be specified independently (12 V / 24 V DC or 110 V / 220 V AC) from the motor voltage.
Both are available. Choose horizontal where vertical clearance is limited, and vertical for a compact footprint; the reservoir must stay correctly oriented for the oil level.
The usual causes are a lost prime, low or wrong fluid, a clogged suction screen, a relief valve stuck open or set too low, or a worn pump. On 12 V units also check battery voltage and ground.
Yes. We customise bore, stroke, mounting, ports, seals, motor voltage, pump displacement, reservoir size and circuit design to your machine.
Sample orders ship in 45-60 days. Bulk orders of 50 units or more ship in 30-45 days.
Every power unit is 100% pressure-tested at 3000 PSI (207 bar) before shipment, and gear pumps are independently life-tested for 300,000 cycles.
Detailed quotes with drawings within 48 hours of receiving your specification.
Coverage from the date of shipment, with complete maintenance and spare-part kits.
Test a single unit before committing to volume production.
Send your specification — motor power, pump displacement, tank size and voltage — and receive a quote with drawings.
Email davidsong@mail.huachen.cc